AvBlend® is a pure microlubicating oil that treats the metal in your engine, helping to reduce wear in your engine while improving performance.

In new or rebuilt engines AvBlend® helps:

• Prevent build-up of carbon, varnish, and coke commonly found in high temperature air-cooled engines. Without AvBlend, leaded aviation fuels create an environment for carbon build-up in the most critical areas of your engine.
• Eliminate damaging dry starts which prematurely wear the internal parts of your engine before reaching TBO. It can take 45 to 120 seconds for oil to reach critical areas of your engine after initial start-up, even though oil pressure registers on the cockpit gauges --without AvBlend, significant engine wear can occur during this period.
• Prevent rust and corrosion during periods of inactivity -- Most aircraft owners don't fly their airplanes enough. AvBlend can protect expensive internal engine components from irreversible rust and corrosion during these down-times and reduce the likelihood of premature replacement.
• Eliminate unnecessary maintenance costs due to premature wear, at annual inspections
• Keep new and rebuilt engines dimensionally correct from break-in to TBO
• Maintain factory new performance and efficiency over the lifetime of the engine...

For used engines, AvBlend® helps:

• Clean your engine by dissolving existing carbon, varnish and coke commonly found in high temperature air-cooled engines.
• Restore lost performance and combustion efficiency to engines with accumulated hours, in engines within factory service limits.

In 1997, side-by-side laboratory testing proved the benefits of AvBlend®. An engine with AvBlend outperformed an otherwise identical engine with real-world benefits for aircraft owners. The engine with AvBlend:

• Produced 9.25% more horsepower
• Used 8.5% less fuel
• Had 60% less wear
• Had 66% less Carbon Deposit Build-Up

How and When do I use AvBlend?

To get the full benefit of AvBlend, use it with each 25-hour oil change, not to exceed 50 hours or four months between oil changes. Add one 12 ounce can of AvBlend to four cylinder engines with a 4-8 quart oil system capacity. Add two 12 ounce cans to 6 or 8 cylinder engines with a 9 quart or larger oil system. For the Continental TSIO and IO-360, use 1 can, since the engine has an 8 quart oil system.

Buy one or save by buying four.